Alloy Steel F5 Flanges, ASTM A182 F5 Slip on Flanges, F5 Alloy Steel Pipe Flanges

Q: What is an Alloy Steel ASTM A182 F5 Flange?

Alloy Steel ASTM A182 F5 Flange is a type of pipe flange made from alloy steel and manufactured according to the ASTM A182 standard. The F5 designation indicates that the flange is made of low-carbon alloy steel that has been alloyed with a minimum of 5% chromium, which gives it high resistance to corrosion and high-temperature oxidation.

Q: Why Important Alloy Steel ASTM A182 F5 Flange?

A182 Grade F5 Flanges are important in high-temperature and high-pressure applications because of their high strength, corrosion resistance & dimensional accuracy, which makes them suitable for use in harsh environments such as power plants, oil and gas refineries, and chemical plants. They conform to ASTM A182 standards, providing good mechanical properties such as high tensile strength, good ductility, and excellent resistance to impact.

Q: What are the applications of Alloy Steel ASTM A182 F5 Flanges?

Some of the common applications of Alloy Steel ASTM A182 F5 Flanges include oil and gas industry, power generation, chemical processing, pharmaceuticals, marine and shipbuilding and industrial piping systems. ASTM A182 GR F5 Flange are typically used in high-temperature and high-pressure applications, where their strength and corrosion resistance are important.

Best Price of ASTM A182 F5 WNRF Flanges Exporter, Alloy Steel F5 Industrial Flanges, Stockholder Of Alloy Steel F5 RTJ Flange, ASME SA182M Alloy Steel F5 Class 300 Flange Wholesaler, Alloy Steel Grade F5 Flat Flange, ASTM A182 GR F5 Flange, SA 182 GR F5 Steel Flanges, A182 F5 Cl1 Forged Flanges, ASME SA182 F5 Pipe Flanges, SA182 F5 Plate Flange, ASTM A182 F5 Alloy Steel EN 1092-1 Flanges Traders in India.

Table Of Content

What is ASTM A182 F5 Alloy Steel Flanges
Standard Specification For Alloy Steel ASTM A182 F5 Industrial Flanges
Alloy Steel F5 Flange Standards / Types And Pressure Class
ASTM A182 F5 Alloy Steel Flanges Available Types
Alloy Steel F5 Equivalent
Types Of Grade F5 Alloy Steel Flanges

ASTM A182 Alloy Steel F5 Slip On Flanges
ASTM A182 Alloy Steel F5 Socket Weld Flanges
ASTM A182 Alloy Steel F5 Blind Flanges
ASTM A182 Alloy Steel F5 Weld Neck Flanges
ASTM A182 Alloy Steel F5 Threaded / Screwed Flanges
ASTM A182 Alloy Steel F5 Lap Joint Flanges
ASTM A182 Alloy Steel F5 Long Weld Neck Flanges
ASTM A182 Alloy Steel F5 Spectacle Blind Flanges
ASTM A182 Alloy Steel F5 Plate Flanges
ASTM A182 Alloy Steel F5 Ring Type Joint Flanges
ASTM A182 Alloy Steel F5 Tongue & Groove Flanges
ASTM A182 Alloy Steel F5 Reducing Flanges

Chemical Composition of Grade F5 Alloy Steel Pipe Flanges
Mechanical Properties of ASTM A182 Alloy Steel F5 Plate Flanges
SA182 F5 Orifice Flanges Tolerance Chart
ASME SA182 Gr F5 Pipe Flanges Thickness Calculation
ASTM A182 F5 Alloy Steel Flanges Available Types
Alloy Steel F5 AISI, ASME, DIN, BS, EN Flanges Application
Export Destinations For Grade F5 Alloy Steel Flanges

ASTM A182 F5 Flange is made of chromium molybdenum steel. It has a high rupture resistance and is lightweight. It is also resistant to hydrogen attack and sulfide corrosion cracking. Alloy Steel ASTM A182 F5 Flanges material is commonly used in the petrochemical and power generation industries. These flanges are widely used in several industries, including the power generation, gas processing, oil drilling, pharmaceutical, and seawater equipment industries. They are also available as slip-on or threaded flanges. The alloy steel grade F5 and alloy steel F9 flanges are suited for high temperatures and pressure. These flanges are manufactured using high-quality raw materials and are capable of withstanding high pressures. As a result, they are the most popular choice for any industrial project.

Alloy Steel F5 Flanges, A182 F5 Flange,ASTM A182 F5 Alloy Steel Lap Joint Flanges, ASTM A182 F5 Alloy Steel Pipe Flanges, Stockist of Alloy Steel F5 Slip On Flanges, Global Supplier of A182 F5 Weld Neck Flange, ANSI B16.5 Alloy F5 Orifice Flanges, A182 F5 Blind Flanges Dealer in India, BS10 Table D, Table E, Alloy Steel ASTM A182 F5 Blind Flanges, DIN Standard Flanges.

Alloy Steel F5 Flanges are available in different sizes from 1/2-inch to 36-inch nominal bore sizes. They are available in multiple pressure ratings and are typically used for smaller piping systems. They are also used in hazardous environments, where welding connections would be dangerous. If you are looking for high-quality flanges, look no further than our ASTM A182 F5 Flange . Neo Impex Stainless Pvt. Ltd. is a leading Manufacturers, Suppliers, and Exporters that provide the best quality ASTM A182 F5 Flanges.

Our ASTM A182 F5 Alloy Steel Blind Flanges and Alloy Steel ASTM A182 F22 Flanges are square-shaped and are instrumental in connecting pipes of nominal bore size without welding and are suitable for high-pressure hydraulic systems. Our Alloy Steel ASTM A182 F5 Weld-neck Flanges are supplied to aid industrial, high-pressure services like condensers, boilers, evaporators, heat exchangers, etc. Also, we offer a wide range of Alloy Steel ASTM A182 F5 Flanges such as ASTM A182 F5 Slip On Flanges, Alloy Steel F5 Weld Neck Flanges, F5 Alloy Steel Socket Weld Flanges, A182 F5 Alloy Steel Blind Flanges, Alloy Steel F5 Orifice Flanges, A182 Alloy Steel F5 Spectacle Blind Flanges, A182 F5 Screwed / Threaded Flanges, Alloy Steel F5 Reducing Flanges, ASTM A182 F5 Alloy Steel Ring Type Joint Flanges (RTJ), etc.

What is an Alloy Steel ASTM A182 F5 Flange?

Alloy Steel ASTM A182 F5 Flange is a type of pipe flange made from alloy steel and manufactured according to the ASTM A182 standard. The F5 designation indicates that the flange is made of low-carbon alloy steel that has been alloyed with a minimum of 5% chromium, which gives it high resistance to corrosion and high-temperature oxidation.

Why Important Alloy Steel ASTM A182 F5 Flange?

A182 Grade F5 Flanges are important in high-temperature and high-pressure applications because of their high strength, corrosion resistance & dimensional accuracy, which makes them suitable for use in harsh environments such as power plants, oil and gas refineries, and chemical plants. They conform to ASTM A182 standards, providing good mechanical properties such as high tensile strength, good ductility, and excellent resistance to impact.

What are the applications of Alloy Steel ASTM A182 F5 Flanges?

Some of the common applications of Alloy Steel ASTM A182 F5 Flanges include oil and gas industry, power generation, chemical processing, pharmaceuticals, marine and shipbuilding and industrial piping systems. ASTM A182 GR F5 Flange are typically used in high-temperature and high-pressure applications, where their strength and corrosion resistance are important.

Alloy Steel ASTM A182 F5 Threaded Flanges, ASTM A182 Alloy Steel Slip On Flanges, Alloy Steel 5Cr-1/2Mo Socket Weld Flanges, F5 Alloy Steel Lapped joint Flanges, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Alloy Steel F5 Forged Flanges, Manufacturer Of A182 F5 Chrome Moly Plate Flange in Mumbai, India.

Standard Specification For Alloy Steel ASTM A182 F5 Industrial Flanges

Specifications : ASTM A182 / ASME SA182

Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size : 1/2″ to 36″

Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

ASTM A182 F5 Alloy Steel Pipe Flanges

Forged and Plate Flanges

Products		Size
ASTM A182 Alloy Steel F5 Slip-On Flanges	ASTM A182 Alloy Steel F5 Threaded Flanges	Sizes 1/8″ – 36″ Raised Face or Flat Face
ASTM A182 Alloy Steel F5 Weld Neck Flanges	ASTM A182 Alloy Steel F5 Socket Weld Flanges
ASTM A182 Alloy Steel F5 Blind Flanges	ASTM A182 Alloy Steel F5 Reducing Flanges
ASTM A182 Alloy Steel F5 Lap Joint Flanges	ASTM A182 Alloy Steel F5 Plate Flanges
ASTM A182 Alloy Steel F5 Orifice Flanges	ASTM A182 Alloy Steel F5 Forged Flanges
ASTM A182 Alloy Steel F5 Ring Type Joint Flanges	ASTM A182 Alloy Steel F5 Square Flanges

Alloy Steel F5 Flange Standards / Types And Pressure Class :

ASME/ANSI B 16.5	Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Alloy Steel F5 Equivalent

Material	Casting Specification Equivalent	DIN	DIN W. Number	Application	Common	Type Of	UNS Number	Forging Specification
5Cr-1/2Mo	A217-C5	12CRMO195	1.7362	High temp refinery service	K41545	A182-F5/F5a

Types Of Grade F5 Alloy Steel Flanges

Chemical Composition of Grade F5 Alloy Steel Pipe Flanges

Grade	C	Mn	Si	S	P	Cr	Mo
A182 F5	0.15	0.3 - 0.6	0.5	0.03	0.03	4 - 6	0.044 - 0.65

Mechanical Properties of ASTM A182 Alloy Steel F5 Plate Flanges

Grade	Tensile Strength (Mpa)	Yield Strength (Mpa)	Elongation %
A182 F5	275	485	20

SA182 F5 Orifice Flanges Tolerance Chart

ASTM A182 F5 Flanges		Tolerance Table
A	O.D. (Outside Diameter)	When O.D. (Outside Diameter) is 24" or less: ±1/16" (1.6 millimeter) When O.D. (Outside Diameter) is over 24": ±1/8" (3.2 millimeter)
D	Inside Diameter (I.D.)	10" and smaller: ±1/32" (0.8 mm) 12" thru 18": +1/8" (3.2 mm) 20" and larger: -1/16" (1.6 mm)
B	Diameter of contact face	1/16" raised face: ±1/32" (0.8 mm) 1/4" RF (Raised Face), T/G (Tongue & Groove), (male & female), (m/f): ±1/64" (0.4 millimeter)
J	Diameter of hub at base	When hub base is 24" or smaller: ±1/16" (1.6 millimeter) When hub base is over 24": ±1/8" (3.2 millimeter)
H	Diameter of hub at point of welding	5" and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm) 6" and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
P	Drilling	Circle Bolts: ±1/16" (1.6 mm) Bolts hole spacing: ±1/32" (0.8 mm)
	Eccentricity of bolt circle with respect to facing	2 1/2" and smaller ±1/32" (0.8 mm) maximum 3" and larger ±1/16" (1.6 mm) maximum
C	Thickness	18" and smaller: ±1/8" (3.2 mm), -0" 20" and larger: ±3/16" (4.8 mm), -0"
K	Length of hub	10" and smaller: ±1/16" (1.6 mm) 12" and larger: ±1/8" (3.2 mm)

ASME SA182 Gr F5 Pipe Flanges Thickness Calculation

Wall Thickness Of ASTM A182 F5 Flanges
Normal Pipe Size (NPS)	O.D. (Outside Daimeter)	Sch 10	Sch 20	Sch 30	STD Wall Outside Daimeter	Sch 40	Sch 60	EXT Hvy Outside Daimeter	Schedule 80	Schedule 100	Schedule 120	Schedule 140	Schedule 160	XX Hvy
½	0.84	0.083	...	...	0.109	0.109	...	0.147	0.147	...	...	...	0.188	0.294
¾	1.05	0.083	...	...	0.113	0.113	...	0.154	0.154	...	...	...	0.219	0.308
1	1.315	0.109	...	...	0.133	0.133	...	0.179	0.179	...	...	...	0.25	0.358
1 ¼	1.66	0.109	...	...	0.14	0.14	...	0.191	0.191	...	...	...	0.25	0.382
1 ½	1.9	0.109	...	...	0.145	0.145	...	0.2	0.2	...	...	...	0.281	0.4
2	2.375	0.109	...	...	0.154	0.154	...	0.218	0.218	...	...	...	0.344	0.436
2 ½	2.875	0.12	...	...	0.203	0.203	...	0.276	0.276	...	...	...	0.375	0.552
3	3.5	0.12	...	...	0.216	0.216	...	0.3	0.3	...	...	...	0.438	0.6
3 ½	4	0.12	...	...	0.226	0.226	...	0.318	0.318	...	...	...	...	0.636
4	4.5	0.12	...	...	0.237	0.237	...	0.337	0.337	...	0.438	...	0.531	0.674
5	5.563	0.134	...	...	0.258	0.258	...	0.375	0.375	...	0.5	...	0.625	0.75
6	6.625	0.134	...	...	0.28	0.28	...	0.432	0.432	...	0.562	...	0.719	0.864
8	8.625	0.148	0.25	0.277	0.322	0.322	0.406	0.5	0.5	0.594	0.719	0.812	0.906	0.875
10	10.75	0.165	0.25	0.307	0.365	0.365	0.5	0.5	0.594	0.719	0.844	1	1.125	1
12	12.75	0.18	0.25	0.33	0.375	0.406	0.562	0.5	0.688	0.844	1	1.125	1.312	1
14	14	0.25	0.312	0.375	0.375	0.438	0.594	0.5	0.75	0.938	1.094	1.25	1.406	...
16	16	0.25	0.312	0.375	0.375	0.5	0.656	0.5	0.844	1.031	1.219	1.438	1.594	...
18	18	0.25	0.312	0.438	0.375	0.562	0.75	0.5	0.938	1.156	1.375	1.562	1.781	...
20	20	0.25	0.375	0.5	0.375	0.594	0.812	0.5	1.031	1.281	1.5	1.75	1.969	...
22	22	0.25	...	...	0.375	...	...	0.5	...	...	....	....	....	....
24	24	0.25	0.375	0.562	0.375	0.688	0.969	0.5	1.219	1.531	1.812	2.062	2.344	....
26	26	....	....	....	0.375	....	....	0.5	....	....	....	....	....	....
30	30	0.312	0.5	0.625	0.375	....	....	0.5	....	....	....	....	....	....
36	36	0.312	0.5	0.625	0.375	0.75	....	0.5	....	....	....	....	....	....
40	40	....	....	....	0.375	....	....	0.5	....	....	....	....	....	....
42	42	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..
48	48	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..

ASTM A182 F5 Alloy Steel Flanges Available Types

Alloy Steel F5 Flanges	Alloy Steel F5 EN 1092-1 Flanges
Alloy Steel F5 BS 4504 Flanges	Alloy Steel F5 Forged Flanges
Alloy Steel A182 F5 Flanges	Alloy Steel F5 Slip on Flanges
Alloy Steel F5 Flat Flange Suppliers	ANSI F5 Alloy Steel Blind Flange
Alloy Steel F5 Weld Neck Flanges Dealer	Alloy Steel F5 Socket weld Flanges Exporter
Alloy Steel F5 Long Weld Neck Flanges Stockholder	Steel ASTM A182 F5 Threaded Flanges Distributors
Alloy Steel ASTM A182 F5 Reducing Flanges	Alloy Steel F5 Ring Type Joint Flanges Manufacturer
Alloy Steel A182 F5 Orifice Flange	Alloy Steel 5Cr-1/2Mo Spectacle Blind Flanges
Chrome Moly Alloy Steel F5 WNRF Flange	Alloy ASTM A182 F5 SORF Flanges
ANSI B16.5 Alloy Steel F5 RTJ Flanges	Alloy Steel F5 Screwed Flanges Stockist
ASTM A182 Alloy Steel F5 Lap Joint Flanges	ASME SA182 Alloy Steel F5 BLRF Flange
Alloy Steel F5 Raised Face Flanges	ASTM A182 F5 Alloy Steel Nipoflange
A182 Alloy Steel F5 Square Flanges	ASME SA182M Alloy Steel F5 SWRF Flange
Steel F5 Tongue & Groove Flanges	Chrome Moly Alloy Steel F5 Male & Female Flanges
Chrome Moly Alloy Steel F5 DIN Flanges	Alloy Steel F5 ASME B16.5 Flanges

Alloy Steel F5 AISI, ASME, DIN, BS, EN Flanges Application

ASTM A182 F5 Pipe Flanges are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of ASTM A182 F5 Alloy Steel Flanges through a worldwide network of stock-keeping branches. These ASTM A182 F5 Alloy Flange is use in various industries like :

Alloy Steel F5 Flanges uses in Oil and Gas Pipeline
ASTM A182 F5 Alloy Steel Pipe Flanges uses in Chemical Industry
Grade F5 Alloy Steel Flanges uses in Plumbing
Alloy Steel ASTM A182 F5 Flange uses in Heating
ASTM A182 F5 Plate Flanges uses in Water Supply Systems
ASTM A182 F5 Alloy Steel Forged Flanges uses in Power Plant
Alloy A182 F5 Flanges uses in Paper & Pulp Industry
A182 F5 Alloy Steel Flanges uses in General Purpose Applications
ASME SA182 Alloy Steel F5 Industrial Flanges uses in Fabrication Industry
Alloy Steel F5 Flanges uses in Food Processing Industry
ANSI Alloy Steel F5 Flanges uses in Structural Pipe

People Also Searched For

A Wide Range Of the Best Quality Alloy Steel ASTM A182 F5 Flanges, alloy steel f5 flanges specifications, alloy steel astm a182 f5 flange price list, alloy steel f5 flange price, alloy steel f5 flanges dimensions, a182 f5 chemical composition, a182 f5 equivalent, astm a182 f5 specification, astm a182 chemical composition, astm a182 f5 equivalent, chrome moly flanges, astm a182 f5 pdf, astm a182 f5 mechanical properties, sa182 f5, f5 material spec, astm a182 f5, astm a182 f5 class 1, astm a182 f5 class 3, astm a182 standard pdf, f5 material properties, sa182 flange, ASME/ ANSI, EN, DIN, AFNOR, AWWA, GOST, BS, JIS, AS, MSS, SA, UNI F5 Flanges, Ring Spacers, BS 10 Flanges, a182 f5 flanges manufacturer, 150# Alloy Steel F5 Flanges, 300# Alloy Steel F5 Flanges, 600# Alloy Steel F5 Flanges, 1500# Alloy Steel F5 Flanges, 2500# Alloy Steel F5 Flanges Manufacturer, Supplier in India.

People Also Searched For

A Wide Range Of the Best Quality 904L Stainless Steel Outlets, 904L Outlets price list, Stainless steel outlets price, Branch Connection Fittings, Outlets Pipe Fittings, Branch Connection, Outlets Fittings, MSS SP-97 Outlets, Industrial Outlets, Outlets Fittings, Swagged Nipple Outlet, Insert welding outlet, gr.5 alloy steel flanges, Coupling Outlet, Sweep Outlet, Flange Outlet, Branch Outlets Fittings, Pipe Outlets, Forged Branch Outlets Fittings, Threaded Pipe Outlets, Manufacturer, Supplier in India.

Export Destinations For Stainless Steel 904L Outlets

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

We are renowned & most acclaimed Source, Stock, Distribution, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A182 F5 Flanges in Alloy Steel.

For More Information About ASTM A182 F5 Alloy Steel Flange Please Call +91 22 6639 3943/44 or Send an Email to [email protected]

Quick Contact

World Map

Alloy Steel ASTM A182 F5 Flanges

Standard Specification For Alloy Steel ASTM A182 F5 Industrial Flanges

ASTM A182 F5 Alloy Steel Pipe Flanges

Types Of Grade F5 Alloy Steel Flanges

Chemical Composition of Grade F5 Alloy Steel Pipe Flanges

Mechanical Properties of ASTM A182 Alloy Steel F5 Plate Flanges

SA182 F5 Orifice Flanges Tolerance Chart

ASME SA182 Gr F5 Pipe Flanges Thickness Calculation

ASTM A182 F5 Alloy Steel Flanges Available Types

Alloy Steel F5 AISI, ASME, DIN, BS, EN Flanges Application

People Also Searched For

People Also Searched For

Export Destinations For Stainless Steel 904L Outlets

Useful links

Materials

Special Products

Address